AgentTesla Malware Attack Windows Machine Steal Sensitive Data

0
[ad_1]

AgentTesla is a notorious malware that functions as a keylogger and information stealer. 

By logging keystrokes and capturing screenshots on infected systems, this notorious malware targets sensitive data like:-

  • Login credentials
  • Financial information

Recently, the cybersecurity researchers at BitSight Security discovered that AgentTesla malware had been actively attacking Windows machines to steal sensitive data.

Document
Free Webinar

Compounding the problem are zero-day vulnerabilities like the MOVEit SQLi, Zimbra XSS, and 300+ such vulnerabilities that get discovered each month. Delays in fixing these vulnerabilities lead to compliance issues, these delay can be minimized with a unique feature on AppTrana that helps you to get “Zero vulnerability report” within 72 hours.

AgentTesla Malware Attacking Windows

AgentTesla is a .NET-written Windows malware that steals sensitive data and emerged for the first time in 2014. It faced legal issues once it was sold widely, leading to its shutdown in March 2019. 

It later reemerged as OriginLogger, which shares the same code base and poses a persistent threat as a licensed-based Malware as a Service (MaaS) on the clear web with websites like-

  • agenttesla[.]com
  • originpro[.]me
OriginLogger
OriginLogger (Source – Bitsight)

Researchers found that one of the sites sells short-term licenses (up to six months) for AgentTesla’s instance “OriginLogger” with several customizations. 

AgentTesla is a prevalent malware that was rebranded and updated in November. It spreads via phishing emails with loaders like:-

After infecting it harvests the following data:-

  • Credentials
  • Keystrokes
  • Clipboard data
  • Screenshots 

Not only that even, it also uses various protocols like:-

Over 1500 recent AgentTesla configurations were found, and 75% used email for exfiltration. However, since December 2022, no HTTP exfiltration has been observed.

Exfiltration methods by number of configs
Exfiltration methods by number of configs (Source – Bitsight)

The data gathered by the malware are mainly from:-

  • Browsers
  • VPN clients
  • Mail clients
  • FTP clients
  • VNC clients
  • Microsoft Applications
  • Social media apps

Pricing plans

In total, there are three plans, and here below, we have mentioned those three plans:-

  • 1-month plan will cost $50
  • 3-month plan will cost $75
  • 4-month plan will cost $90

Researchers accessed 3 months of victim data from 210 malware campaigns, compromising 5300 computers between Oct-Dec 2023. 

Around 2000 IP addresses were geographically mapped, which shows that the U.S. was the most targeted country, followed by

Common country top-level domains suggested European ties. Exploited data is used for direct exploitation and profit-driven schemes like ransomware and business email compromise attacks.

To counter the evolving threats, researchers urged to integrate the:-

  • Multi-layered defense mechanism
  • Proactive detection
  • Employee awareness
  • Robust cybersecurity strategy

Try Kelltron’s cost-effective penetration testing services for free to assess and evaluate the security posture of digital systems


[ad_2]
Source link

January security update rolling out for Pixel Watch, Pixel Watch 2

0
[ad_1]

As the second week of January unfolds, Google is gearing up to release a new security patch. It will be the first security update of 2024 for the Pixel Watch and Pixel Watch 2. The tech giant has officially announced the commencement of the rollout for the January 2024 security update. It is specifically tailored for Pixel Watch devices operating on Wear OS 4.

For users eagerly awaiting the update, Google will make it available to the supported watches all over the world gradually over the next week. The phased rollout reportedly depends on the specific device and carrier.

Google recommends installing all available updates to receive the 2024 security patch

The company has primarily focused on addressing security vulnerabilities for the January 2024 security update. The build number of this update is TWD9.240105.004.A1, noted Google. You can explore the detailed changes accompanying the patch in the Android Security Bulletins. However, the emphasis is on enhancing the security posture of Pixel Watch devices. Users should expect fixes and improvements aimed at fortifying the device against potential threats.

To ensure Pixel Watch and Pixel Watch 2 users get the latest security enhancements, Google recommends users install the previously available updates. To do so, you can navigate to the Settings menu, scroll down to System, and select System Updates. Google will likely notify users on their watches when the over-the-air (OTA) update becomes accessible. Google staggers the release across carriers and devices to manage a seamless deployment.

The overarching objective of the January 2024 update is to equip Pixel Watch users with the latest security patches, aligning with Google’s commitment to providing a secure and up-to-date user experience. Users are encouraged to stay vigilant for notifications on their devices and promptly apply the update to fortify their Pixel Watches against potential security threats.


[ad_2]
Source link

Apple wants visionOS devs to avoid two terms: it’s AR and VR

0
[ad_1]

Apple Vision Pro is coming very soon; pre-orders begin on January 19, and it will hit shelves in the US on February 2. If that’s not all, it is also tipped to sell like hotcakes. It runs on Apple’s upcoming visionOS, especially for Apple Vision Pro. Now, let’s delve into Apple’s strategy on the developer front. California’s tech major has laid out stringent guidelines, urging developers not to label their applications for visionOS as “AR” or “VR.”

Apple doesn’t want visionOS apps to be called AR or VR

After Apple shared details about the Apple Vision Pro launch, they updated Xcode so that developers can now submit visionOS apps to the App Store. But there’s a rule: Apple doesn’t want developers to use terms like “AR” and “VR” for their new apps. They want to make it clear that visionOS is for spatial computing, not the traditional AR or VR stuff.

There’s more to it. The company has asked developers to avoid using terms such as AR, VR, XR, and MR, according to 9to5Mac. Notably, these terms stand for Augmented Reality, Virtual Reality, Extended Reality, and Mixed Reality, respectively. Notably, folks at TechRadar pointed out that Apple primarily markets the Vision Pro as a “spatial computing” platform. However, at the 2023 WWDC, Apple CEO Tim Cook presented it as an “entirely new AR platform.” You read it right, AR.

Apple’s new laws for developers

A new page on the Apple Developer website outlines all the recommendations and requirements for launching Apple Vision Pro apps on the App Store. The guidelines cover various aspects, including testing procedures, screenshot preparation, icon creation, and more.

Additionally, Apple provides instructions on how developers should name and describe their apps. Apple’s demand from developers to meet requirements such as using the lowercase “v” for the “visionOS” comes as expected. However, the rule against using AR or VR, nevertheless, stands out.

For users eager to experience the Apple Vision Pro, it comes at $3,499 for the 256GB storage variant. It is available exclusively in the US for now.


[ad_2]
Source link

Best of CES 2024: Hisense 110UX ULED TV

0
[ad_1]

Hisense really stole the show at CES 2024 by offering the next level of viewing experience

CES 2024 just happened, and a bunch of tech brands showed off their latest and greatest technology. One of the brands is Hisense, a leader in the display and television industry. Among the handful of TVs it announced, we saw the Hisense 110UX. This is truly the TV to get if you are looking to get the most out of your movie-watching experience.

There’s some serious tech going on behind the screen with the Hisense 110UX. First off, this is a massive 110-inch display made to create a cinematic movie-watching experience. It uses mini LED technology, which means that it’s capable of producing a picture with higher contrast than a traditional LCD display. Also, it pretty much eliminates all blooming. So, you will have a viewing experience on par with an OLED display.

The Hisense 110UX can be viewed in very bright environments as well. It has a jaw-dropping 10,000 nits of peak brightness. That’s incredibly bright. To put that into perspective, you can see your phone clearly in the direct sunlight with 2000 hits of brightness. So, this TV can be bright enough for any situation.

A screen this impressive wouldn’t possibly come without incredible dynamic range. In fact, the TV’s hardware and software work in sync to enhance the picture and cover a wide dynamic range. It covers 95% of the BT.2020 color palette. Other TVs from leading brands typically cover only 80%. With the inclusion of AI, the Hi-View Engine X chipset further refines the picture to make it even better.

Moving on to the audio, this TV uses 4.2.2 Channel audio and is also compatible with Dolby Atmos Flex Connect. It has an amazing picture with amazing audio to match.

The Hisense 110UX brings a truly next-level viewing experience, and that’s why it won the Android Headlines Award for Best of CES 2024.


[ad_2]
Source link

Affordable POCO X6 series is here with 120Hz displays, 67W charging

0
[ad_1]

Xiaomi has released new POCO smartphones, as expected. The POCO X6 series is here. It consists of two smartphones, the POCO X6 and POCO X6 Pro. Their design is very similar, but the ‘Pro’ model does have a slightly different-looking camera setup on the back.

Both smartphones have a two-tone finish on the back, thanks to a large camera island which is black-colored. The frame around the phone is flat, though it does have chamfered edges. All the physical buttons sit on the right-hand side of both smartphones. The two phones are different in the spec department, so we’ll talk about them separately. We’ll kick things off with the ‘Pro’ model.

The POCO X6 Pro is a bit more powerful, but it looks very similar to its sibling

The POCO X6 Pro is the more powerful of the two. It is fueled by the MediaTek Dimensity 8300-Ultra SoC. It comes with either 8GB or 12GB of RAM, and those two models are accompanied by 256GB and 512GB of storage, respectively. Xiaomi used LPDDR5X RAM here, and UFS 4.0 flash storage. When it comes to performance, LiquidCool Technology 2.0 is also on board.

A 6.67-inch CrystalRes 1.5K display sits on the front. This is an AMOLED DotDisplay, as Xiaomi calls it. The refresh rate here is 120Hz, and the phone has an instant touch sampling rate of 2,160Hz. The max brightness is 1,800 nits, and the panel is protected by the Gorilla Glass 5.

POCO X6 Pro all colors

It includes a 5,000mAh battery, and supports 67W charging

A 5,000mAh battery is also included, and 67W wired charging is supported. You’ll also find a charger in the box. A 64-megapixel main camera (OIS) sits on the front, along with an 8-megapixel ultrawide camera, and a 2-megapixel macro camera. A single 16-megapixel unit is included on the front.

There are two SIM card slots here, and 5G is supported, as is Bluetooth 5.4. The phone is IP54 certified, while HyperOS is a part of the package too, as are stereo speakers. The POCO X6 Pro also has an in-display fingerprint scanner and an IR blaster.

The POCO X6 Pro measures 160.45 x 74.34 x 8.25mm (8.35mm vegan leather model), and weighs 186 grams (plastic) / 190 grams (vegan leather model). The phone comes in Black, Gray, and Yellow colors as shown above.

The POCO X6 has a 120Hz display, and utilizes Qualcomm’s SoC

The POCO X6, on the flip side, is fueled by the Snapdragon 7s Gen 2 processor. It also comes in 8GB and 12GB RAM variants. The 8GB RAM model includes 256GB of storage. The 12GB RAM variant is available in both 256GB and 512GB storage flavors. LPDDR4X RAM is used, and UFS 2.2 flash storage, so it’s inferior to what the ‘Pro’ model offers.

A 6.67-inch CrystalRes 1.5K AMOLED DotDisplay is in use here too. It also offers a 120Hz refresh rate, and a 2,160Hz instant touch sampling rate. The peak brightness is the same as on the ‘Pro’ variant, and Gorilla Glass Victus protects this panel.

POCO X6 all colors 1

A slightly larger battery is in use here, while a charger is included

This handset includes a 5,100mAh battery, and supports 67W charging, while the charger is included in the box. The POCO X6 also has a 64-megapixel main camera with OIS, in addition to an 8-megapixel ultrawide camera, and a 2-megapixel macro unit.

The POCO X6 has two SIM card slots and supports Bluetooth 5.2, and HyperOS. It has an in-display fingerprint scanner, stereo speakers, and is IP54 certified. An IR blaster is included at the top of the phone, and facial scanning is enabled too.

This smartphone measures 161.15mm x 74.24 x 7.98mm, and weighs 181 grams. The POCO X6 comes in Black, Blue, and White colors, all of which are shown above.

The pricing starts at $249

The POCO X6 Pro with 8GB of RAM and 256GB of storage costs $299. The variant with 12GB of RAM and 512GB of storage is priced at $369 via “official e-commerce channels”. The POCO X6, ont he flip side, comes in three variants. The 8GB RAM model with 256GB of storage costs $249. The 12GB RAM models with 256GB and 512GB of storage are priceed at $269 and $319, respectively. Early bird discounts are also applicable for limited time.


[ad_2]
Source link

Best Of CES 2024: Matic robot vacuum

0
[ad_1]

Matic is the robot vacuum we’ve all been dreaming of

Robot vacuums are a very normal part of everyday life for many people these days. If you think back to about 20 years ago, it was a different story. Robot vacuums were a thing but they were much less common in households. These days, you can find robot vacuums in many people’s homes, and across every price point with a varying degree of features. Many of them offer similar functions but at the same time, can be unique in more than a few ways. All of them have one thing in common though.

They all use a combination of sensors and lidar tech to capture a map of your home and then use that to navigate and clean up. Enter Matic, a robot vacuum that was announced at CES this week. It swaps all of that out for five cameras powered by computer vision to visually see where it’s cleaning. The reason this is a big deal is because Matic, the company of the same name that created this little cleaning bot, says it solves the two biggest problems that other robot vacuums have. They can get stuck or lost more often than you’d like. Matic apparently doesn’t have these issues.

It won’t get lost because the 5 cameras will allow it to see all of its surroundings. It knows where it’s going at all times and is less likely to bump into anything. The computer vision meanwhile, helps it learn over time to make it smarter. Learning when the best times to clean are. It also has big wheels on the front to help it roll over any floor surface. So high pile rugs shouldn’t be an issue.

Nor should other things that it might encounter as it rolls around your home sucking up dirt and debris. Cables, shoes, a coffee mug. If these things are sitting around on the floor the cameras will see it, Matic says, and the vacuum will simply move around that area.

This bot has a trick up its sleeve – it can clean up liquid spills

If there’s one thing robot vacuums need improvement on, it’s mopping. A lot of the models out today have variants with a built-in mop. But most of them won’t do as good of a job as you hope and none of them can actually clean up liquid spills. Matic can. The unique way it was designed allows it to roll forward with the vacuum head sucking up dirt and debris. If it comes across a liquid spill or a spot that needs mopping, and then the vacuum head lowers as Matic changes into mop mode, and it rolls over that area to clean it up.

It also stores all of the liquid, dirt, and debris in the same bag. You do have to empty the bag yourself, but only once every month or so. You just open up the top lid and pull the bag out and toss it, then replace the bag so it’s ready again. The idea is that Matic is a completely autonomous robot vacuum (other than emptying the bag) that doesn’t need input from you whether it’s to start a clean or set up a schedule. It’ll just clean on its own and get better at doing it the more it cleans.

Matic is a unique robot vacuum that offers features that set it apart from every other robot vacuum on the market. And that’s why Matic has earned the Best of CES 2024 award. Matic will begin shipping in March and pre-orders are already up on the Matic website. It retails for a discounted price of $1,495 if you pre-order.


[ad_2]
Source link

Galaxy S21 FE, Note 20 receive Samsung’s January 2024 update

0
[ad_1]

Samsung has released the January 2024 Android security patch for the Galaxy S21 FE. The Fan Edition (FE) device is currently picking up the latest security update in some European countries. A wider rollout should follow soon. The Galaxy Note 20 series, meanwhile, is now receiving the update in international markets following the US release a few days back.

Galaxy S21 FE gets the January 2024 security update

First spotted by SamMobile, the January SMR (Security Maintenance Release) is now available for Galaxy S21 FE users in Ireland, Spain, and the UK. The update comes with the firmware build number G990BXXS6FWL5. The build number may vary in other regions but the content of the update will remain the same. Samsung’s changelog confirms that the device is only picking up this month’s security fixes.

“The security of your device has been improved,” the official release notes state. The January 2024 security release for Galaxy devices contains fixes for 80 vulnerabilities. 75 of those are Android OS patches coming from Google, including one critical issue. The remaining five vulnerabilities don’t exist on Android OS but exclusively on Samsung products and system components.

If you are using the Galaxy S21 FE, the latest update will patch all of these vulnerabilities on your phone. Samsung has already pushed the January SMR to the Galaxy S23 FE, Galaxy S22 series, Galaxy Note 20 series, Galaxy Z Fold 5, Galaxy Z Flip 5, Galaxy Z Fold 4, Galaxy Z Flip 4, Galaxy Z Fold 3, and Galaxy Z Flip 3. The updates may not be available globally but it is just a matter of time now.

As usual, you will get a notification once a new update is available for your Samsung smartphone. You can tap on the notification to initiate the download and complete the update. To check for updates manually, go to Settings > Software update and tap on Download and install. While the latest update doesn’t bring any new features, Samsung will push Android 14-based One UI 6.1 to most of these devices shortly.

The Galaxy Note 20 series is receiving the new security patch globally

Earlier this week, Samsung pushed the January update to the Galaxy Note 20 and Galaxy Note 20 Ultra in the US. The last two Note-branded phones are now receiving the new SMR globally. The update is available in Europe and Latin America with the firmware build number N98*FXXS9HXA1. The Galaxy Note 20 series is done getting feature updates, so no One UI 6.1 for the lineup. It will get security patches at least until late 2024.


[ad_2]
Source link

Best Of CES 2024: Tineco Pure One Station

0
[ad_1]

Tineco’s Pure One Station will make vacuuming less of a chore

Let’s be honest with ourselves here, vacuuming is not usually a fun task, it’s a chore that you don’t want to do but, it needs to be done so you grit your teeth and you do it. Tineco wants to make the act of vacuuming less of a chore and more of a simple task that you don’t have to hate, and the Pure One Station it announced at CES this week is the tool that you will be able to use to get to this point. The Pure One Station is a powerful push vacuum with baked-in smart technology. It also comes with an OmniHub that is essentially a 4-in-1 machine. The OmniStation is where you’ll hang the vacuum up when you’re done cleaning.

But the OmniStation also charges the vacuum in between uses. Additionally, it can self-clean the vacuum and its bin, brushes, tubes, and filters. This is probably the best part about the vacuum setup. The fact that the OmniStation cleans all of those parts for you on top of emptying the bin is nothing short of amazing. To make this self-cleaning process even better, the OmniStation can detect how full its own bin is. It does this so it can adjust when to actually do the self-cleaning.

Now you might be thinking, “it empties the vacuum bin for me but I still have to empty the OmniStation bin.” That is true. However, the OmniStation bin is large enough to store up to 60 days’ worth of dust and debris. So you will only have to realistically empty it once every couple of months. And that’s not that bad at all. This is about as simple and hands-off as vacuuming can get with a manual push vacuum. And that’s a wonderful thing if you hate this particular cleaning task.

It’s tough on dust and debris, but gentle enough to use on pets

Vacuums are a crucial part of keeping a clean home. So you want them to be powerful enough to ensure they get as much dust and debris off the floors as possible. The Tineco Pure One Station will have no problem with that as it provides powerful suction. That being said, it is also perfectly fine to use on pets for grooming. It even comes with a ‘FurFree’ kit that you can slap on to groom your furry friends and get all that loose hair before it falls off and gets all over the floors and carpets.

And if you’re worried about the hair getting stuck in the brushes, don’t be. The vacuum comes with a ‘ZeroTangle’ brush that traps hair and prevents it from wrapping around the brush. Vacuuming might never be fun, but it can be less of a chore with this vacuum. That plus all smart features and its reasonable price (it’s $799 by the way) are why the Tineco Pure One Station has earned the Best of CES 2024 award.


[ad_2]
Source link

Mirai-based NoaBot Botnet Targeting Linux Systems with Cryptominer

0
[ad_1]

A noticeable difference between NoaBot and Mirai is that rather than DDoS attacks, the botnet targets weak passwords connecting SSH connections to install cryptocurrency mining software.

Cybersecurity researchers at Akamai have discovered cryptomining malware called NoaBot based on the notorious Mirai botnet. The crytojacking malware NoaBot is currently targeting Linux servers and has been active since January 2023.

According to Akamai, a noticeable difference between NoaBot and Mirai is that rather than DDoS attacks (Distributed Denial of Service attacks), the malware targets weak passwords connecting SSH connections and installs cryptocurrency mining software, allowing attackers to generate digital coins using victims’ computing resources, electricity, and bandwidth.

Here, it is important to mention that NoaBot malware has also been used to deliver P2PInfect, a separate worm discovered by Palo Alto Networks in July 2023.

NoaBot is compiled using the UClibc code library, unlike the standard Mirai library. This changes how the antivirus protections detect NoaBot, categorizing it as an SSH scanner or generic trojan. The malware is statically compiled and stripped of symbols, while strings are obfuscated instead of saved as plaintext, making it harder for reverse engineers to extract details.

The NoaBot binary runs from a randomly generated folder, making searching devices harder. The standard Mirai dictionary is replaced with a large one, and a custom-made SSH scanner is used. Post-breach capabilities include installing a new SSH-authorized key.

This botnet has grown significantly, with over 800 unique IP addresses worldwide showing signs of NoaBot infections. The worm is a customized version of Mirai, a malware that infects Linux-based servers, routers, web cameras, and other Internet of Things devices.

Interestingly, the malware includes embedded song lyrics from the “Who’s Ready for Tomorrow” song by Rat Boy and IBDY, but later samples do not have these. The botnet also adds command line arguments, such as the “noa” flag, which installs a persistence method after a reboot.

Mirai-based NoaBot Botnet Targeting Linux Systems with Cryptominer
Screenshot: Akamai
Mirai-based NoaBot Botnet Targeting Linux Systems with Cryptominer
Screenshot: Akamai

Threat actors modified the XMRig miner to extract the mining configuration before execution. The miner’s functions involve function calls and signals. The configuration contains the mining pool and wallet address details. However, IDA misses the binary name and pool IP placeholder, allowing attackers to estimate the profitability of the cryptomining gig.

Researchers noted that the attackers were running their private pool instead of a public one, eliminating the need for a wallet. However, domains are no longer resolvable with Google’s DNS, and no recent incidents involving the dropping of the miner are noticed, suggesting the threat actors may have halted the campaign for better opportunities.

Hackread has been following incidents involving Mirai since it was discovered in 2016. Mirai is a self-replicating malware targeting Linux-based IoT devices, used to infect other vulnerable devices.

In 2016, it was used in a massive DDoS attack against Dyn DNS, paralyzing the internet. The creators released the source code, allowing crime groups to incorporate it into their attacks. Mirai scans the internet for Telnet connections via infected devices to crack Telnet passwords, then targets additional devices using the same technique.

Akamai urges Linux server administrators to protect their systems from NoaBot by keeping software updated, using strong passwords, enabling two-factor authentication, and monitoring unauthorized activity. This is crucial as NoaBot can launch DDoS, data breaches, and cryptojacking attacks.

  1. Hackers behind Mirai botnet & DYN DDoS attacks plead guilty
  2. Hackers behind Mirai botnet to avoid jail for working with the FBI
  3. Tiny Mantis Botnet Can Launch Powerful DDoS Attacks Than Mirai
  4. Reaper malware outshines Mirai; hits millions of IoT devices worldwide
  5. Mirai Variant ‘OMG’ Turns IoT Devices into Proxy Servers for Cryptomining

[ad_2]
Source link

Microsoft to integrate AI text generation into Windows 11 Notepad

0
[ad_1]

After extending its AI-powered Copilot from Windows 11 to Windows 10 and later to Android, Microsoft is now reportedly bringing some of that AI magic to Notepad with text generation capabilities in Windows 11. While the company has been actively incorporating AI into various aspects of its ecosystem, Windows enthusiasts have stumbled upon references to a potential AI bot, possibly named Cowriter, within the app package of Notepad. This move aligns with Microsoft’s efforts to enhance user experience by integrating AI functionalities into its applications.

Windows Copilot, Microsoft’s all-purpose digital AI assistant, has been evolving, and now it seems Notepad is getting its own AI companion. References in the app package folder suggest a ChatGPT-powered bot may be on the horizon. Tentatively called Cowriter, this AI assistant could provide users with text generation capabilities directly within the Notepad app. The files include references like “CoWriterCreditLimitDialog” and “CoWriterDropDownButton,” indicating potential UI elements for managing the AI’s features.

The addition of an AI-powered text generation feature in Notepad signals a potential revamp of the iconic text editor.

The discovery hints at the possibility of a credit system, where users may have usage quotas for the AI feature. Similar to other Microsoft AI-powered features like Bing Image Generator or Cocreator in Paint, users may receive credits to generate unique content within Notepad, with the potential for boosts and a subsequent slower generation process once the initial credits are used up.

While Microsoft hasn’t officially announced this AI-powered text generation feature, Windows Insiders have uncovered UI references like “CoWriterDropDownButton” and “CoWriterInfoButton,” suggesting buttons for accessing the Notepad AI feature and seeking help or additional information.

Notepad’s AI tool will likely provide users with context-specific suggestions for their text, similar to the Editor feature introduced in Microsoft Edge. The promotional image found in the updated app package indicates that users may receive multiple suggestions for a text selection, offering modifications related to “Length,” “Tone,” “Format,” and “Instructions.” This aligns with Microsoft’s broader strategy of integrating AI to enhance productivity and user engagement across its suite of applications.

While Microsoft has not yet officially confirmed any details about the official release, speculation suggests that Notepad’s AI feature might undergo testing soon, with a potential waitlist for interested users, possibly within the Windows Insider community. Microsoft continues to explore innovative ways to leverage AI to offer more intelligent and context-aware tools to its users.


[ad_2]
Source link